Machinery

To further cement our continuous commitment to quality and efficiency, we source our machinery from leading and globally trusted glass processing equipment manufacturers in Europe including Glaston, Lisec for cutting & DG, Bentler for washing, Uniglass for tempering and Beveloni for processing.

From cutting and tempering to double glazing and insulation, Universal Glass & Aluminium provides endless solutions to best meet your processed glass needs. With the use of premium equipment and machinery, we are able to offer you with the highest standard of quality and efficiency.

Uniglass

UNICHARGE Heating System

Features:

  • Recipe library with quick access for flexible production
  • Patented dynamic load pattern recognition
  • Glass temperature monitoring system
  • Dynamic top/bottom heater balance control
  • Focused matrix heating
  • All conveyer drives with AC motors and step-less inverter controls
  • Independent top/bottom blowing distance adjustment in quench
  • Blower units for tempering glass 3.8-12mm (ANSI, EN)

LISEC – Glass Cutting Line

Glass Cutting Line, Type ASL 60/30

Technical Specifications:

  • Maximum glass size – 6000x3250mm (jumbo sheet)
  • Glass thickness – 3 – 19mm
  • Cutting tolerance +/- 0.4mm
  • Width of trim cuts can be selected at control console, minimum width 10mm

LISEC – Vertical Insulation

Vertical Insulation Glass Production Line, Type LV 35/25 HLP

Technical Specifications:

  • Maximum glass size – 3500x2500mm
  • Minimum glass size – 350X180mm
  • Unit thickness – 12 -52mm
  • Vertical transportation height – 520mm, +/-20mm
  • Glass inclination – 6 degrees

LISEC – semi-automatic plant

Semi-automatic plant for production of endless and bent space frames by a vertical bending machine, plugged profile connection, type BSV 30

Technical Specifications:

  • Length of bending table – 4500mm (5200mm)
  • Height of support wall – 2500mm
  • Depth of bending table – 1800mm
  • Working height – 900mm
  • Overall height – 2800mm

Benteler

Horizontal Flat Glass Washing Machine Type tecWasher 25/3

Features:

  • 1 spray section upper and lower
  • 3 cylindrical brush washing sections (0,15mm bristles)
  • 3 tanks with pumps and heaters
  • Standard water circulation: cascade system
  • 2 pairs of air knives
  • Fan with noise insulation
  • Automatic throttle valve
  • Air filters EU 5
  • Glass thickness adjustment driven by a motor, via operator panels
  • Frequency controlled conveyor drive
  • 1 blower platform
  • Pneumatic lifting system for upper and lower brushes
  • 1m in-feed conveyor connecting with the washer drive
  • 1m exit conveyor connecting with the washer drive
  • Lighting for the exit conveyor

Technical specifications:

  • Max width of glass – 2500mm
  • Min width of glass on the reference line – 175mm
  • Min length of glass on the reference line – 350mm
  • Glass thickness – 1.5 – 19mm
  • Noise rating 1m free field – 80 + 2dB (A)
  • Reference line – on right side
  • Conveyor speed – 3 – 13m/min

Glaston

VT1250 AUT. – CODE 208502

The VT 1250A is a user-friendly and particularly strong drilling machine with a double head and an automatic lifting and drilling function. The upper drill can be adjusted to a manual function by means of a lever.

Technical Specifications:

  • Maximum drillable thickness with both drills – 3 – 25mm
  • Maximum drillable thickness with one drill – 50mm
  • Minimum glass size – 100x100mm
  • Hole diameter with both drills – 4 – 130mm
  • Maximum diameter with one drill – 220mm
  • Speed – 390-5250rpm
  • Installed power – 3.5kW
  • Machine length – 2100mm
  • Machine width – 1000mm
  • Machine height – 2000mm
  • Weight – 1000kg

Glaston

GEMY/9-C – Code 1209

Automatic vertical straight-line machine with 9 cup wheels makes flat edges whilst the one cylinder wheel processes glass sheet corner cutting.

Technical Specifications:

  • Workable thickness – 3-40mm
  • Minimum workable height – 55mm
  • Installed power – 21kW
  • Minimum pressure of compressed air – 6 bars
  • Maximum consumption of compressed air – 25Nlt/min
  • Length – 7800mm
  • Width – 1700mm
  • Height – 2300mm
  • Weight – 3330kg
  • Working speed – 0.5 – 5m/min
  • Water tank capacity – 720I

Glaston

MAX/80-CNS – Code 0203803400

Designed to meet high productivity and quality requirements, the MAX 80 CNS is an automatic bevelling machine with 12 cup wheels.

Technical Specifications:

  • Workable thickness – 3 – 25mm
  • Minimum workable height (strips) – 35mm
  • Minimum workable dimensions – 40x40mm
  • Maximum bevel width – 60mm
  • Bevel inclination – 3° – 45°
  • Installed power – 35kW
  • Minimum pressure of compressed air – 8 bars
  • Maximum consumption of compressed air – 25Nlt/min
  • Length – 8400mm
  • Width – 1700mm
  • Height – 2300mm
  • Weight – 5300kg
  • Working speed 0.5-4.1m/min

Glaston

SB/10 – Code – 101101

The SB10, a horizontal bevelling and edging machine is used for customising shapes from small, medium and large glass pieces.

Technical Specifications:

  • Workable thickness – 3 – 40mm
  • Minimum and maximum working sizes for bevelling – 230 – 2100mm
  • Minimum and maximum working sizes for edging – 100 – 2100mm
  • Minimum workable size for non-continuous operation – 100mm
  • Maximum bevel width – 40 mm
  • Maximum pressure of compressed air – 8 bars
  • Maximum consumption of compressed air – 25Nlt/min
  • Inclination of bevel – 0° – 45°
  • Installed power – 2.3kW
  • Overall radius – 1600mm
  • Base sizes – 1000x1000mm
  • Maximum height – 2000mm
  • Weight – 600kg

Ashton

UNIX Airflow

Features:

  • Heavy duty design based on the world renowned UNIXTM wet seamer/arrissers
  • Main bearings, drives and tensioners are mounted outside the 500kg machine chassis and away from abrasive glass powder
  • Designed for 24/7 reliability, even in the harshest operating environments
  • Maximum throat enclosure for efficient dust containment
  • A clear front visor ensures full operator safety combined with complete visibility
  • Back-rollers close to the point of grind to minimise belt twist
  • Very high volume 1200 m3/h air flow into the machine throat and out of the rear panel, ensures maximum dust retention. Filter efficiency >99.9% extractor < 70 dB(A)